UL Ti MATE RANGE - MODEL NUMBER - S02652 underwater lights limited™ ™ DESCRIPTION This is our most popular “through-hull” submersible marine light IPX8 rated to 10 bar for coastal power boats and some ten thousand have been installed world wide. The light is suitable for installation into GRPfibreglass and wooden hulls and must be installed below the minimum waterline. The boat must be hauled out for installation, although maintenance is carried out from inside the hull. The light has a sealed integral igniter which makes it safer, and allows the ballast to be located away from the bilge area. The latest UL Ti MATE 80 can also be fitted with a wide beam lens. Also available in an extended version. 8/ 7L 0$7( ;HQRQ OXPHQ TECHNICAL SPECIFICATION Lamp Type - Xenon bulb Lamp Life - 3000 Hours - Colour Temp - 7000 K Voltage / Amp 12VDC/6.4A - 24VDC/2.5.A 8/ 7L 0$7( : :$77 25'(5 180%(5699RU99 Glass Lens - Borosilicate glass PP Material - Aluminium Bronze and 5083 ALU PPP Classification - Lloyds Approved PP XQGHUZDWHU OLJKWV OLPLWHG 70 Manufacturers of the Original underwater lights Brand Marine Lighting Products since 1991 Light Output - 4,800 Lumens 8/ 7L 0$7( (;7(1'(' )25 7+,&. +8//6 25'(5 180%(56;7 NOTEInstallation Instruction: The hole cut-out should be 61 mm. Hull thickness range 12-65 mm and 80-110mm. Recommended distance between lights 1 to 2 metres Electrical Information: Recommend only 2 lights for each power supply cable. See wiring diagram on opposite page. For additional information please visit our web site. 180mm 80mm 40mm : %$//$67 25'(5 180%(5 6 99 RU 6 99